Gloves for cleaning guns

Butyl/Butyl II rubber provides superior resistance to highly corrosive acids and is excellent for handling ketones and esters. This synthetic rubber also provides the highest permeation resistance to gases and water vapors of any protective material used...

Gloves feature a five-layer fabric compacted to a thickness of 2.7mil. Laminating a high-energy polymer (EVOH) with a low-energy polymer (PE) creates a fabric impervious to at least 90% of all organic chemicals for four hours at 35 degrees C. Each layer...

Gloves feature a five-layer fabric compacted to a thickness of 2.7mil. Laminating a high-energy polymer (EVOH) with a low-energy polymer (PE) creates a fabric impervious to at least 90% of all organic chemicals for four hours at 35 degrees C. Each layer...

Gloves feature a five-layer fabric compacted to a thickness of 2.7mil. Laminating a high-energy polymer (EVOH) with a low-energy polymer (PE) creates a fabric impervious to at least 90% of all organic chemicals for four hours at 35 degrees C. Each layer...

This 3M reflective glove has reflective stripes, a Gunn cut design and nylon knit cuffs. It is made of 65-Percent Polyester and 35-Percent cotton knit.

These ambidextrous gloves are resistant to splashes of acids, bases, alcohols and dilute aqueous solutions of most chemicals. Flexible and comfortable to wear Cooler than vinyl, with superior finger flexibility and grip Available in both powdered and...

Keep it covered, and ensure clean and safe food-prep. Loose-fitting, flexible polyethylene gloves provide workers with enhanced finger dexterity. Embossed design improves tactile response. Clean and safe food-prep. Loose and flexible. Embossed...

Blended knit of polyester, fiberglass and Spectra Extended knit cuff Can be worn under most gloves for cut-resistant protection 10 times the cut-resistance of 100% Spectra of the same weight

TurtleSkin CP Neon 300 Gloves TurtleSkin CP Neon 300 provides excellent levels of both cut and puncture protection while keeping the dexterity you need to perform your tasks. ANSI Puncture Level 3; ANSI Cut Level 3 Suggested Uses: General all purpose...